Home/Product ranges/Hydraulics/Two separate hoses
Selection guideReels for two separate hoses
Replacing a reel or equipping a machine? Compare A2, A2/F, A2.19 and A2.25 for two separate hoses, according to the circuits and mounting.
Choose a family
These four families cover two separate hoses. The full table also distinguishes the S3 and S4 alternatives, with three or four lines.
A2 Standard
Two separate hoses; twelve sizes for standard requirements, with 4SP construction available on the larger sizes.
View part numbers
A2/F
Two separate hoses with a flat mounting flange; check the length against the A2, particularly in 3/8″ on the larger sizes.
View part numbers
A2.19
Two separate hoses; larger diameter for flow requirements above 40 l/min.
View part numbers
A2.25
Two separate hoses; a family for long lengths and large diameters, up to 1″.
View part numbersYour constraints, your family
On a small screen, scroll the table horizontally if necessary.
| Your situation | Family | What it offers |
|---|---|---|
| Standard requirement with two separate lines |  A2 Standard | Twelve sizes, up to 22 m, 40 l/min. 4SP available on all larger sizes. |
| Mounting on a flat surface |  A2/F | Flat flange. Note: less length than the A2 in 3/8″ on the larger sizes. |
| Flow rate above 40 l/min |  A2.19 | Larger diameter. |
| Long length, large diameter |  A2.25 | Up to 1″. |
| Three separate hoses |  S3 | Three independent lines. |
| Four separate hoses |  S4 | Goes further than the A4 on almost every criterion, but takes up more space. |
Check the two independent circuits
Specifications of each circuit. Record the fluid, pressure and diameter of each hose without assuming they are identical.
Replacement of one line. Specify whether the enquiry concerns a single hose, the complete hose assembly or the equipped reel.
Special construction. Identify the temperature or material requirements for each line and the construction of the existing hoses.
To compare another hose arrangement, see the twin-hose families. Check the dimensions and circuit compatibility before changing the configuration.
A difference to know between A2 and A2/F
Do not transfer an A2 part number directly to the flange-mounted A2/F. In 3/8″, the listed usable lengths differ particularly for the 620 mm flanges — 11,8 m versus 14,5 m — and 650 mm flanges — 13,8 m versus 16,5 m. Check the exact row and the mounting drawing.
Compare overall dimensions and mounting
Compare the width, hole centres, bracket and connections of the part numbers under consideration. The dimensions of the A2 and AG families cannot be inferred from the number of lines alone.
When replacing a reel, also check the hose routing and the space required for connections on the machine.
What to send for a quotation
- For a replacement: full part number, photograph of the nameplate and views of the existing installation.
- For each line: diameter, flow rate, pressure and fluid — they may differ.
- Required usable length.
- Available space, bracket type and mounting hole centres.
- Connection direction and mounting position.
Quotations and technical advice on request.