DEMAC product ranges
Find your DEMAC reel family or prepare a replacement using the existing part number, entered in the site search. For a hydraulic configuration with four hoses, compare the A4, S4 and M4 families (FR).
The eight ranges
The pages below provide access to part numbers, configurations and the points to check for a replacement.
Hydraulic hose reels for machinery
From 1 to 6 hydraulic lines, automatic rewind
Explore the range (FR)
Combined hose and cable reels
Hoses and cable on a single drum
Explore the range (FR)
Electrical cable reels
Signal and power, spring-driven or motorised
Explore the range (FR)
Workshop and fluid reels
Air, water, oil, diesel, grease
Explore the range (FR)
Forklift reel kits
Reel, hose and fittings to install
Explore the range
Rotary unions, slip ring assemblies and sensors
Hydraulic, electrical, travel measurement
Explore the range (FR)
Hoses and cables
Single, twin, triple, quadruple
Explore the range (FR)
Accessories
Guides, pulleys, stops, pulling grips
Explore the range (FR)Compare the ranges in one table
On a small screen, scroll the table horizontally to read all columns.
| Range | What it reels | Key points |
|---|---|---|
| Hydraulic hose reels for machinery (FR) | 1 to 6 pressurised lines, on machinery | 27 families; travel up to 49 m depending on configuration. See specifications by part number. |
| Workshop and fluid reels (FR) | Air, water, oil, diesel, grease, welding gases | Wall-mounted series and specialised configurations; specifications by part number. |
| Combined hose and cable reels (FR) | Hoses and cable on the same drum | 5 families, from 2 to 6 hydraulic lines |
| Electrical cable reels (FR) | Power and signal, from 1 to 450 A | Spring-driven or motorised; travel depends on configuration |
| Rotary unions, slip ring assemblies and sensors (FR) | Transfer during rotation, measure travel | Hydraulic, electrical, measurement |
| Hoses and cables (FR) | What is fitted to the reels | Pressure and cross-section tables |
| Accessories (FR) | Guide, limit travel, connect, pull | Guides, stops, pulleys, pulling grips |
| Forklift reel kits | Hydraulic, combined hose and cable, or cable | 4 families; right-hand and left-hand models depending on part number |
Find the range by installation type
If the part number is unreadable, the installation and payout method help identify the range to examine.
On a small screen, scroll the table horizontally to read all columns.
| On machinery | In a workshop | On a vehicle | |
|---|---|---|---|
| Payout | By machine movement | By hand | By hand or motorised |
| Rewind | Automatic, spring-driven | Spring-driven, with a locking pawl | Variable |
| Mounting | On the machine | On a wall | In the vehicle |
| Lines | 1 to 6 | 1 | 1 to 4 |
| Range | Hydraulic reels for machinery (FR) | Workshop and fluids (FR) | Emergency vehicles (FR) |
Three things to check before ordering
Before selecting a part number, check the compatibility of the hose and cable configuration, mounting and environment.
Permissible pressure of the complete assembly. Check the limits of the reel, hose and connections. A pressure option on the reel does not increase the rating of the other components.
Hose and cable configuration and installation space. Identify twin or separate hoses, their diameters and minimum bend radius. Also compare the required travel, drum and mountings with the existing assembly.
ATEX requirement. Specify the area classification and required marking. The configuration and documents applicable to the part number must be confirmed; see the page on ATEX and special requests (FR).
Identify a part number or prepare a quotation
Send the full part number or a photograph of the nameplate, views of the installation and mounting dimensions. For a new configuration, specify the circuits, travel, operating conditions and available installation space.
Quotations and technical advice on request.