DEMAC range · Quotations and technical advice on request
A1.25 single-hose reel, 135 l/min. Six sizes, diameters 1/2″ to 1″ and 9 to 49 m usable length depending on configuration. Separate 2SC/T2, 4SP and 4SH tables.
| Product type | Hose reel |
|---|---|
| Hose configuration | Single hose |
| Number of lines | 1 line |
| Flow rate | 135 l/min |
| Application | High-pressure hydraulics, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 300 bar, 400 bar |
| Hose diameter | 1/2" - DN 13, 5/8" - DN 16, 3/4" - DN 19, 1" - DN 25 |
| Length range | Up to 15 m, 15 to 30 m, 30 to 50 m |
| ATEX zone | On request |
| Hose type | 2SC, 4SH, 4SP, T2 |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, Supplied with hoses |
| Technical drawings | View technical drawings |
The A1.25 is a spring-return reel for one hydraulic hose, up to 135 l/min. Six sizes cover side plates from 810 to 1600 mm and 9 to 49 m usable length depending on diameter and hose construction. The 49 m applies to 1600 part numbers in 1/2″ or 5/8″, not to the whole range.
A1D: right-hand; A1S: left-hand. In A1D1600.25.16.XX, .25 is the series, .16 denotes 5/8″ and XX the hose type.
/VD.Dimensions B and D are specified below, in millimetres; A and weights are not provided. The drawing shows a 1 × 1″ connection; request the complete mounting drawing.
| Right-hand model | B (mm) | D: side plate (mm) |
|---|---|---|
| A1D800.25 | 242 | 810 |
| A1D900.25 | 242 | 910 |
| A1D1000.25 | 242 | 1000 |
| A1D1200.25 | 300 | 1200 |
| A1D1400.25 | 300 | 1400 |
| A1D1600.25 | 300 | 1600 |
Total and usable lengths in metres. Data for 4SH are provided in 1″, while 4SP is shown for the other diameters. Dashes do not indicate available capacity.
| Part number | Ø | 2SC/T2: total (m) | 2SC/T2: usable (m) | 4SP: total (m) | 4SP: usable (m) | 4SH: total (m) | 4SH: usable (m) |
|---|---|---|---|---|---|---|---|
| A1D800.25.16.XX | 5/8″ | 14.0 | 13.0 | 14.0 | 13.0 | — | — |
| A1D800.25.19.XX | 3/4″ | 12.0 | 11.0 | 12.0 | 11.0 | — | — |
| A1D800.25.25.XX | 1″ | 10.0 | 9.0 | — | — | 10.0 | 9.0 |
| A1D900.25.12.XX | 1/2″ | 21.0 | 20.0 | 21.0 | 20.0 | — | — |
| A1D900.25.16.XX | 5/8″ | 19.0 | 18.0 | 19.0 | 18.0 | — | — |
| A1D900.25.19.XX | 3/4″ | 17.5 | 16.5 | 15.0 | 14.0 | — | — |
| A1D900.25.25.XX | 1″ | 13.5 | 12.5 | — | — | 11.2 | 10.2 |
| A1D1000.25.12.XX | 1/2″ | 25.0 | 24.0 | 25.0 | 24.0 | — | — |
| A1D1000.25.16.XX | 5/8″ | 23.0 | 22.0 | 23.0 | 22.0 | — | — |
| A1D1000.25.19.XX | 3/4″ | 20.0 | 19.0 | 19.0 | 18.0 | — | — |
| A1D1000.25.25.XX | 1″ | 15.0 | 14.0 | — | — | 15.0 | 14.0 |
| A1D1200.25.12.XX | 1/2″ | 38.0 | 37.0 | 38.0 | 37.0 | — | — |
| A1D1200.25.16.XX | 5/8″ | 30.0 | 29.0 | 30.0 | 29.0 | — | — |
| A1D1200.25.19.XX | 3/4″ | 30.0 | 29.0 | 30.0 | 29.0 | — | — |
| A1D1200.25.25.XX | 1″ | 26.0 | 25.0 | — | — | 23.0 | 22.0 |
| A1D1400.25.12.XX | 1/2″ | 45.0 | 44.0 | 45.0 | 44.0 | — | — |
| A1D1400.25.16.XX | 5/8″ | 40.0 | 39.0 | 35.0 | 34.0 | — | — |
| A1D1400.25.19.XX | 3/4″ | 35.0 | 34.0 | 35.0 | 34.0 | — | — |
| A1D1400.25.25.XX | 1″ | 30.0 | 29.0 | — | — | 30.0 | 29.0 |
| A1D1600.25.12.XX | 1/2″ | 50.0 | 49.0 | 50.0 | 49.0 | — | — |
| A1D1600.25.16.XX | 5/8″ | 50.0 | 49.0 | 50.0 | 49.0 | — | — |
| A1D1600.25.19.XX | 3/4″ | 45.0 | 44.0 | 45.0 | 44.0 | — | — |
| A1D1600.25.25.XX | 1″ | 40.0 | 39.0 | — | — | 40.0 | 39.0 |
Example: A1D1400.25.16 in 5/8″ gives 39 m usable length with 2SC/T2, compared with 34 m with 4SP. At size 1600, the 1/2″ and 5/8″ rows give 49 m usable length; 1″ is limited to 39 m usable on this page.
The permissible pressure of the supplied assembly must respect the limits of the reel, hose and connections. Specify the fluid, its temperature, the flow rate and working pressure to validate the equipped part number; the pressure rating of the reel alone does not guarantee that of every hose combination.
TU1 catalogue reference data: pressure ratings of the hose alone, in bar. These values are not the guaranteed pressure rating of the equipped reel. The final configuration must respect the limits of all its components; the table below does not establish that every combination is available in every size.
| Internal Ø | Hose type | Pressure rating of hose alone (bar) |
|---|---|---|
| 1″ | 2SC | 210 |
| 1″ | 4SH | 380 |
| 1/2″ | T2 | 260 |
| 1/2″ | 2SC | 275 |
| 1/2″ | 4SP | 415 |
| 5/8″ | T2 | 220 |
| 5/8″ | 2SC | 250 |
| 5/8″ | 4SP | 360 |
| 3/4″ | T2 | 150 |
| 3/4″ | 2SC | 215 |
| 3/4″ | 4SP | 350 |
To replace a reel, send the full part number and a photograph of the nameplate, mounting details, right/left-hand version, working position, fittings and usable length. Request the manual for the exact version before installation or servicing.
For another single-hose design, compare the S1 or M1. Weights and some dimensions must be obtained from a drawing before selecting the mounting or replacement. See the DEMAC technical catalogues.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.