DEMAC range · Quotations and technical advice on request

Home›Electrical cable reels›700 series cable reel — enclosed, with cable locking

700 series cable reel — enclosed, with cable locking

Enclosed 700 series with cable locking and swivel bracket. Length, voltage and power ratings with cable wound/unwound depend on the part number.

Conductors
1x · 2x · 3x
Cross-section
1 mm² · 1.5 mm² · 2.5 mm²
Voltage
12 V · 230 V · 24 V
Rewind mechanism
Automatic (spring rewind)
700 series cable reel — enclosed, with cable locking | DEMAC

Technical specifications

Technical specifications

Product type

Electrical cable reel

Application

Electrical cable

Rewind mechanism

Automatic (spring rewind)

Voltage 12 V, 24 V, 230 V, 400 V
Number of conductors 1x, 2x, 3x, 5x
Cross-section

1 mm², 1.5 mm², 2.5 mm², 6 mm²

Length

10 m, 15 m, 20 m, 25 m, 30 m, 5 m, 7 m, 35 m

Length range Up to 15 m, 15 to 30 m, 30 to 50 m
ATEX zone

No

Maximum operating temperature

60 °C

Equipment

With cable

Technical drawings View technical drawings

Key points

Enclosed 700 series: automatic return, cable locking and swivel bracket. Part numbers from 5 to 35 m; voltage and power rating depend on the model, with a separate earthing version.

Part number / replacement

Send the part number, quantity and a nameplate photograph. For a new requirement: voltage, cable, power, usable length and available mounting.

Options

The table specifies the equipment supplied with each part number. The 701 is an earthing version; other part numbers have their own voltage and power ratings. Have the required terminations confirmed.

Installation and operation

  • Maximum unwinding speed: 30 m/min. Temperature: -20 to +60 °C.
  • Protection IP 48 as stated in the catalogue; have the permitted environmental conditions confirmed for the part number.
  • Swivel bracket and cable locking as standard. The drawing shows 1 m of connection cable.
  • For the 701, the source states “2.5 kV max. – Earth connection”: this is not a 230/400 V power supply version, and no power rating is published.

For your enquiry

  • Part number and quantity, or a nameplate photograph for a replacement.
  • Voltage, number of conductors, cross-section and usable length.
  • Equipment power and amount of cable remaining wound during operation.
  • Mounting, connection and operating environment.

Complete part number table

Power ratings in watts, with cable wound and unwound shown separately; dimensions A to G in millimetres. Lengths in metres. Read both power ratings for each part number, without applying a general factor.

Part number Cable Length (m) Voltage / function W wound W unwound A B C D E F G Mass
701 1x6 mm² 15 Earthing, 2.5 kV max. — — 320 8 190 70 30 250 160 5 kg
710 2x1 mm² 7 230 V 800 W 2 000 W 220 8 156 50 30 185 135 4 kg
711 2x1 mm² 15 230 V 800 W 1 400 W 320 8 190 70 30 250 150 7 kg
712 2x1 mm² 15 12 V 60 W 60 W 320 8 190 70 30 250 160 6.5 kg
713 2x1 mm² 15 24 V 60 W 60 W 320 8 190 70 30 250 160 6.5 kg
720 3x1.5 mm² 5 230 V 800 W 2 000 W 220 8 156 50 30 185 135 4 kg
721 3x1.5 mm² 10 230 V 800 W 2 000 W 320 8 190 70 30 250 160 4.5 kg
722 3x1.5 mm² 15 230 V 800 W 2 000 W 320 8 190 70 30 250 160 5.1 kg
723 3x1.5 mm² 25 230 V 800 W 2 000 W 450 8 190 70 30 361 195 8.5 kg
724 3x1.5 mm² 35 230 V 800 W 2 000 W 530 8 190 70 30 425 210 10 kg
726 3x2.5 mm² 20 230 V 1 600 W 3 500 W 530 8 190 70 30 425 210 10 kg
740 5x1.5 mm² 20 400 V 1 000 W 3 000 W 450 15 190 70 30 350 210 9 kg
741 5x1.5 mm² 30 400 V 1 000 W 3 000 W 530 8 190 70 30 425 210 11 kg
753 5x2.5 mm² 15 400 V 2 800 W 5 000 W 450 8 190 70 30 365 210 11 kg

Unsure about the part number?

Tell us the voltage, current, number of conductors and cross-section, payout length and working environment.

Request a quote

Product:

Enter your part number, quantity or required specifications. Fields marked * are required.

Enquiry type *
Your requirements *
If you know the part number, provide the full code and quantity. For a replacement, send the information available: serial number, a clear photo of the nameplate, and a view of the reel and its installation. The serial number is required for certain identification; if it cannot be found, submit your enquiry anyway and see the illustrated locations on the Contact page. For a new configuration, specify the number of hoses or cables, usable length and available technical data. Tell us what you know; we will help you complete the details.
Company
Name
Email address *
Telephone
Attach a file
Maximum file size: 10 MB
For a replacement, if possible attach a clear photo of the label showing the serial number, plus a view of the reel or its installation. If the number cannot be found, send the photos, drawing or part number available; your enquiry can be assessed and completed afterwards. Up to 3 files, maximum 10 MB per file.

Open the form on the Contact page

Call us