DEMAC range · Quotations and technical advice on request
AG.19 reel: two hydraulic lines in a twin hose, 80 l/min, 5/8″ B3 or 3/4″ HDH. Ten sizes and up to 27,5 m usable length depending on configuration.
| Product type | Hose reel |
|---|---|
| Hose configuration | Twin hose |
| Number of lines | 2 hydraulic lines |
| Flow rate | 80 l/min |
| Application | High-pressure hydraulics, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 300 bar, 400 bar |
| Hose diameter | 5/8" - DN 16, 3/4" - DN 19 |
| Length range | Up to 15 m, 15 to 30 m |
| ATEX zone | On request |
| Hose type | B3, HDH |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, Supplied with hoses |
| Technical drawings | View technical drawings |
The AG.19 is a spring-driven reel for two hydraulic lines in a twin hose, up to 80 l/min. Ten sizes cover diameters of 5/8″ in B3 and 3/4″ in HDH, with different usable lengths depending on the hose configuration.
The code AGD420.19.16.B3 identifies a right-hand configuration, series 19, with 5/8″ B3. AGS identifies the left-hand model ; .19 after the series identifies the 3/4″ hose.
/VD.Dimensions in millimetres, weights without hose. The drawing shows 2 × 3/4″ connections and a mounting flange with Ø 11 mm holes, square hole spacing of 60 mm and an overall dimension of 80 mm.
| Model | A | B | D (reel side plate) | E | F | Weight without hose |
|---|---|---|---|---|---|---|
| AGD420.19 | 212 | 108 | 420 | 47 | 322 | 21 kg |
| AGD470.19 | 212 | 108 | 478 | 47 | 322 | 24 kg |
| AGD520.19 | 212 | 108 | 520 | 47 | 422 | 27 kg |
| AGD570.19 | 212 | 108 | 570 | 47 | 422 | 32 kg |
| AGD600.19 | 222 | 128 | 620 | 57 | 422 | 36 kg |
| AGD650.19 | 232 | 138 | 650 | 67 | 422 | 41 kg |
| AGD700.19 | 232 | 138 | 720 | 67 | 532 | 47 kg |
| AGD800.19 | 232 | 138 | 820 | 67 | 532 | 60 kg |
| AGD900.19 | 232 | 138 | 920 | 67 | 532 | 70 kg |
| AGD1000.19 | 232 | 138 | 1000 | 67 | 532 | 75 kg |
Lengths in metres. The configurations in this data sheet pair B3 with 5/8″ and HDH with 3/4″. The AGD420.19.19.HDH does have a usable length of 1,8 m ; no length is specified for the AGD520.19 in 3/4″.
| Model | 5/8″ B3 : total | 5/8″ B3 : usable | 3/4″ HDH : total | 3/4″ HDH : usable |
|---|---|---|---|---|
| AGD420.19 | 2,6 | 2,1 | 2,3 | 1,8 |
| AGD470.19 | 4,0 | 3,5 | 3,7 | 3,2 |
| AGD520.19 | 5,4 | 4,9 | — | — |
| AGD570.19 | 7,0 | 6,5 | 5,2 | 4,7 |
| AGD600.19 | 8,8 | 8,3 | 7,0 | 6,5 |
| AGD650.19 | 10,0 | 9,5 | 8,9 | 8,4 |
| AGD700.19 | 13,0 | 12,5 | 11,0 | 10,5 |
| AGD800.19 | 17,5 | 16,5 | 15,8 | 14,8 |
| AGD900.19 | 23,0 | 22,0 | 18,5 | 17,5 |
| AGD1000.19 | 28,5 | 27,5 | 24,0 | 23,0 |
The models offer usable lengths from 1,8 to 27,5 m : up to 27,5 m with B3 5/8″ and 23 m with HDH 3/4″. Specify the hose type in the suffix XX and explicitly request a version without hose if required.
The permissible pressure of the supplied assembly must comply with the limits of the reel, hose and connections. Specify the fluid, its temperature, flow rate and working pressure to validate the fitted part number ; the pressure rating of the reel alone does not guarantee that of every hose combination.
Reference values from the TU2 catalogue: pressure ratings of the hose alone, in bar. These values are not the guaranteed pressure rating of the fitted reel. The final configuration must comply with the limits of all its components ; the table below does not establish that every combination is available in every size.
| Internal Ø | Hose type | Pressure rating of the hose alone (bar) |
|---|---|---|
| 5/8″ | B3 | 250 |
| 3/4″ | HDH | 250 |
To replace a reel, provide the full part number and a photo of the nameplate, along with the mounting arrangement, right-hand/left-hand configuration, operating position, connections and usable length. Request the manual for the exact configuration before installation or any work.
For two separate hoses in series 19, compare the A2.19 ; changing the hose configuration changes the lengths and overall dimensions. See the DEMAC technical catalogues.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.