DEMAC range · Quotations and technical advice on request
TU3/E, TU2+E and TU4+E assemblies with hoses and cable. Identification by profile, pressure, conductors, cross-section, screening and cable position.
| Product type | Hose |
|---|---|
| Hose configuration | Hoses and cable |
| Application | Electrical cable, High-pressure hydraulics, Oil |
| Hose type | B1, B3, R18, SAE 100 R7, SAE 100 R8, T2 |
| Number of lines | 2 hydraulic lines, 4 hydraulic lines |
| Hose diameter | 1/4" - DN 6, 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13 |
| Pressure | 160 bar, 190 bar, 210 bar, 225 bar, 250 bar, 260 bar, 280 bar, 310 bar, 350 bar, 420 bar |
| Number of conductors | 4x, 6x, 8x, 12x, 16x, 18x |
| Cross-section | 0.5 mm², 1 mm², 1.5 mm² |
| ATEX zone | No |
The assemblies TU3/E, TU2+E and TU4+E combine hydraulic lines and electrical cable. For a replacement, the hose designation alone is not enough: also record the cable, its cross-section, screening and position within the profile.
External Ø and minimum radius in mm; mass in kg/m; pressure in bar. Dashes are retained where mass is unspecified. For TU3/E, the cable column is marked “MAX” in the catalogue.
| Nominal Ø | Hose | Cable | External Ø | Min. radius | Mass | Pressure |
|---|---|---|---|---|---|---|
| 1/4″ — 6.35 mm | B1 | 4x1 mm² | 11.7 | 40 | 0.591 | 310 |
| 5/16″ — 8.10 mm | B1 | 6x1 mm² | 13.4 | 55 | 0.700 | 250 |
| 1/2″ — 12.70 mm | B1 | 12x1 mm² | 18.4 | 85 | 1.188 | 190 |
| 1/2″ — 12.70 mm | B3 | 12x1 mm² | 20.2 | 150 | 1.848 | 350 |
| Nominal Ø | Hose | Cable | External Ø | Min. radius | Mass | Pressure |
|---|---|---|---|---|---|---|
| 1/4″ — 6.35 mm | R7 | 8x1 mm² | 12.2 | 30 | 0.381 | 210 |
| B1 | 8x1 mm² | 11.7 | 40 | — | 310 | |
| 5/16″ — 8.10 mm | R7 | 12x1.5 mm² | 14.4 | 45 | 0.517 | 190 |
| R18 | 12x1 mm² screened | 14.3 | 45 | 0.515 | 210 | |
| 3/8″ — 9.53 mm | R7 | 12x1.5 mm² | 16.0 | 55 | 0.665 | 160 |
| B1 | 12x1.5 mm² | 16.0 | 65 | — | 225 | |
| B1 | 16x1.5 mm² | 16.0 | 65 | 0.910 | 225 | |
| R8 | 12x1.5 mm² | 16.0 | 55 | 0.665 | 280 | |
| B3 | 12x1.5 mm² | 16.6 | 90 | 1.175 | 420 | |
| B3 | 12x1.5 mm² screened | 16.6 | 90 | 1.185 | 420 | |
| 1/2″ — 12.70 mm | R18 | 18x1.5 mm² screened | 21.3 | 70 | — | 210 |
| T2 | 12x1.5 mm² | 20.2 | 85 | 1.300 | 260 |
| Type | Layout | Cable |
|---|---|---|
| Type 1 | Cable in the centre of the assembly | 12x1 mm² screened |
| Type 2 | Cable in a lateral position | 12x1 mm² screened |
| Type 3 | Cable in the centre, inserted into the hose profile | 12x0.5 mm² screened |
The three TU4+E variants use 5/16 inch R18: stated external Ø 14.3 mm, minimum radius 45 mm, mass 0.827 kg/m and pressure 210 bar. Type 1: cable in the centre; type 2: cable at the side; type 3: cable in the centre, inserted into the hose. These layouts are not interchangeable without checking the installation.
Reels to identify according to the requirement: AG/E, A3/E, A4/E, A5/E and A6/E. The presence of these families does not validate every hose/cable assembly combination.
Tell us the medium, internal diameter, working pressure and required length.
Avec votre accord, GEDO utilise des cookies Google Analytics pour mesurer les visites, les achats et les demandes de devis. Aucun nom, courriel ou contenu de formulaire n’est envoyé.
La mesure utilise Google Analytics 4, piloté par Google Tag Manager, après votre accord uniquement. Les données décrivent les pages et produits consultés, les choix de configuration, les paniers, les commandes et les devis envoyés. Nous ne transmettons pas le contenu des formulaires ni vos coordonnées. La mesure publicitaire et la personnalisation des annonces restent désactivées. Votre choix est conservé six mois sur ce site ; vous pouvez le retirer avec « Mes cookies ». Les commandes et demandes de devis fonctionnent aussi en cas de refus.