DEMAC range · Quotations and technical advice on request
A3/E: 3 hydraulic hoses and one electrical cable. Diameter, usable length, conductors and mounting depend on the part number; identification on request.
| Product type | Combined hose and cable reel |
|---|---|
| Hose configuration | Hoses and cable |
| Number of lines | 3 hydraulic lines |
| Flow rate | 40 l/min |
| Application | High-pressure hydraulics, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 160 bar, 190 bar, 210 bar, 280 bar, 300 bar, 350 bar, 400 bar |
| Hose diameter | 1/4" - DN 6, 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13 |
| Length range | Up to 15 m, 15 to 30 m |
| ATEX zone | On request |
| Hose type | B1, B3, SAE 100 R7, SAE 100 R8 |
| Voltage | 50 V |
| Current | 5 A |
| Number of conductors | 2x, 3x, 4x, 5x, 6x, 8x, 12x |
| Cross-section | 0.5 mm², 1 mm² |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, With hoses and cable |
| Technical drawings | View technical drawings |
A3/E: 3 hydraulic lines and one electrical cable, with spring return. Published maximum flow rate 40 l/min; maximum 50 V and 5 A. Hoses and conductors are selected for each configuration.
Specify the full code, suffixes and quantity; attach a photograph of the nameplate and hose/cable assembly. For a new configuration, specify 3 hoses, diameter, usable length and electrical data.
Right-hand A3D or left-hand A3S models; optional /VD vertical downward travel. 400 bar execution, mA connection or bus on request. Suitability must be confirmed for the complete assembly requested.
Suffix /En indicates the number of conductors. The cross-section depends on the hose diameter and type: use the combination published below. Unlisted combinations must not be inferred from another size.
| Suffix | Dimension A (mm) | With 1/4″ R7 | With 5/16″ R7 | With 3/8″ R7 or R8 | With 1/2″ B1 |
|---|---|---|---|---|---|
| /E2 | 263 | 2x1 mm² | 2x1 mm² | 2x1 mm² | 2x1 mm² |
| /E3 | 275 | 3x1 mm² | 3x1 mm² | 3x1 mm² | 3x1 mm² |
| /E4 | 287 | 4x1 mm² | 4x1 mm² | 4x1 mm² | 4x1 mm² |
| /E5 | 298 | 5x1 mm² | 5x1 mm² | 5x1 mm² | 5x1 mm² |
| /E6 | 310 | 6x0.5 mm² | 6x1 mm² | 6x1 mm² | 6x1 mm² |
| /E8 | 310 | 8x0.5 mm² | 8x0.5 mm² | 8x1 mm² | 8x1 mm² |
| /E12 | 345 | Not offered | 12x0.5 mm² | 12x1 mm² | 12x1 mm² |
All 12 sizes in the series are included. Lengths are total lengths in metres; for these configurations, usable length = total length − 0.5 m. Complete Y, X and n using both tables.
| Model code to complete | 1/4″ R7 (Y=06, X=R7) | 5/16″ R7 (Y=08, X=R7) | 3/8″ R7 (Y=10, X=R7) | 3/8″ R8 (Y=10, X=R8) | 1/2″ B1 (Y=12, X=B1) |
|---|---|---|---|---|---|
| A3D295.Y.X/En | 3 | 2.3 | 2.3 | 2.3 | 1.5 |
| A3D320.Y.X/En | 4 | 3.2 | 3.3 | 3.3 | 2.5 |
| A3D340.Y.X/En | 5 | 4.2 | 4 | 4 | 2.5 |
| A3D370.Y.X/En | 6 | 5.3 | 4.5 | 4.5 | 3.5 |
| A3D400.Y.X/En | 7.3 | 6.5 | 5.6 | 5.6 | 4.5 |
| A3D420.Y.X/En | 8.6 | 8 | 6.7 | 6.7 | 4.7 |
| A3D470.Y.X/En | 11.5 | 10 | 9.5 | 9.5 | 7.5 |
| A3D520.Y.X/En | 14.5 | 12.5 | 11.2 | 11.2 | 9 |
| A3D570.Y.X/En | 17.5 | 15.5 | 13.5 | 13.5 | 10.7 |
| A3D600.Y.X/En | 21 | 17 | 16 | 16 | 12.5 |
| A3D650.Y.X/En | 22.5 | 19.5 | 17.5 | 17.5 | 14.5 |
| A3D700.Y.X/En | 27 | 22 | 20 | 20 | 16 |
Example code: A3D400.06.R7/E2. The size number is not always the actual side plate diameter: for example, size 320 here corresponds to 325 mm. Specify whether hoses are required when enquiring.
Dimensions in millimetres. Dimension A depends on the electrical suffix; B to E depend on the size. The catalogue states that 2D drawings and STEP models are available on request.
| Model | B | C | D | E |
|---|---|---|---|---|
| A3D295 | 112 | 35 | 295 | 291 |
| A3D320 | 112 | 37 | 325 | 272 |
| A3D340 | 112 | 37 | 340 | 272 |
| A3D370 | 112 | 37 | 370 | 272 |
| A3D400 | 112 | 47 | 400 | 322 |
| A3D420 | 112 | 47 | 420 | 322 |
| A3D470 | 112 | 47 | 478 | 322 |
| A3D520 | 112 | 47 | 520 | 422 |
| A3D570 | 112 | 47 | 570 | 422 |
| A3D600 | 112 | 47 | 620 | 422 |
| A3D650 | 112 | 47 | 650 | 422 |
| A3D700 | 112 | 57 | 720 | 532 |
Tell us the number of hydraulic lines, cable voltage and number of conductors, usable length and the machine to be equipped.
