DEMAC range · Quotations and technical advice on request

Home›Forklift reel kits›Forklift cable and camera reel kits — CR/S series

Forklift cable and camera reel kits — CR/S series

DEMAC CR/S and CR-04/Camera forklift cable kits: 2, 3, 4 or 6 conductors depending on configuration, a B1 hose of 3/16 inch and CDL 106 guide. Specify part number and signal.

Conductors
2x · 3x · 4x
Hose diameter
3/16" - DN 5
Material
Painted steel or Stainless steel
Forklift cable and camera reel kits — CR/S series | DEMAC

Technical specifications

Technical specifications

Product type

Electrical cable reel

Application

Electrical cable, Forklift truck

Rewind mechanism

Automatic (spring rewind)

Material

Painted steel, Stainless steel

Number of conductors 2x, 3x, 4x, 6x
Cross-section

0.25 mm², 1 mm², 1.5 mm²

Hose diameter

3/16" – DN 5

ATEX zone

No

Equipment

Supplied with B1 hose, cable and articulated guide

The forklift cable kits K33 to K37 cover CR-02/S, CR-03/S, CR-04/S, CR-04/Camera and CR-06/S. Each data sheet describes a reel, a B1 hose of 3/16" combined with the cable and a Crocodile CDL 106 articulated guide.

Stainless steel version: DEMAC builds the CR/S reel of these kits in stainless steel on request; the reference usually carries the /IV suffix. State it with the kit reference and the operating environment: the stainless grade, the protection rating and the components concerned are to be confirmed in the quotation.

For part number identification or replacement

Provide the part number and a photograph of the installation, the number of conductors, their cross-section and the signal type, the mast type and its lift height, the right-hand or left-hand configuration and the available space.

CR/S and Camera configurations

Components specified for each kit
Kit Configuration Cable Flanges Ø mm Stated protection rating
K33 CR-02/S 2 × 1.5 mm² 230 to 420 Not specified on the data sheet
K34 CR-03/S 3 × 1.5 mm² 230 to 420 Not specified on the data sheet
K35 CR-04/S 4 × 1.5 mm² 230 to 470 Not specified on the data sheet
K36 CR-04/Camera 4 × 0.25 mm² 296 to 420 IP65
K37 CR-06/S 6 × 1 mm² 230 to 420 Not specified on the data sheet

IP65 is stated on the K36 Camera data sheet; it is not extended here to the other configurations. The cable construction and connection must be checked for the equipment to be connected.

K36 CR-04/Camera — part numbers

Lengths and heights H are in mm, weights in kg. The heights correspond to the duplex and triplex diagrams in the catalogue.

K36 Camera — values specific to these part numbers
Right-hand / left-hand part no. Flange Ø Total length Usable length H duplex H triplex Weight
22800 / 22801 296 4 000 3 700 6 000 5 000 13.5
22802 / 22803 321 5 000 4 700 7 000 6 000 14.5
22804 / 22805 340 6 000 5 700 8 000 7 000 15
22806 / 22807 370 8 000 7 700 12 000 10 000 15.7
22808 / 22809 400 9 000 8 500 12 500 10 500 16.3
22810 / 22811 420 10 000 9 500 13 000 11 000 20.6

For CR-02/S, CR-03/S, CR-04/S and CR-06/S, refer to their own data sheets K33, K34, K35 and K37 for part numbers and heights: the Camera table does not apply to them. See the forklift reel kit range and the information on installing a reel.

Unsure about the part number?

Tell us the voltage, current, number of conductors and cross-section, payout length and working environment.

Request a quote

Product:

Enter your part number, quantity or required specifications. Fields marked * are required.

Enquiry type *
Your requirements *
If you know the part number, provide the full code and quantity. For a replacement, send the information available: serial number, a clear photo of the nameplate, and a view of the reel and its installation. The serial number is required for certain identification; if it cannot be found, submit your enquiry anyway and see the illustrated locations on the Contact page. For a new configuration, specify the number of hoses or cables, usable length and available technical data. Tell us what you know; we will help you complete the details.
Company
Name
Email address *
Telephone
Attach a file
Maximum file size: 10 MB
For a replacement, if possible attach a clear photo of the label showing the serial number, plus a view of the reel or its installation. If the number cannot be found, send the photos, drawing or part number available; your enquiry can be assessed and completed afterwards. Up to 3 files, maximum 10 MB per file.

Open the form on the Contact page

Call us