DEMAC range · Quotations and technical advice on request
DEMAC CR 10: 1 mm² cable, maximum 50 V and 4 A. Part numbers, lengths and dimensions to identify your reel or prepare a replacement.
| Product type | Electrical cable reel |
|---|---|
| Application | Electrical cable, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Voltage | 50 V |
| Current | 4 A |
| Number of conductors | 2x, 3x, 4x, 6x, 7x, 8x, 12x, 16x, 18x, 20x, 25x, 30x, 32x, 36x |
| Cross-section | 1 mm² |
| Length | 10 m, 12 m, 14 m, 15 m, 18 m, 20 m, 21 m, 22 m, 25 m, 27 m, 28 m, 30 m, 32 m, 40 m, 5 m, 6 m, 8 m, 35 m, 38 m |
| Length range | Up to 15 m, 15 to 30 m, 30 to 50 m |
| ATEX zone | No |
| Maximum fluid temperature | 60 °C |
| Equipment | With cable, Without cable |
| Technical drawings | View technical drawings |
The DEMAC CR 10 series accommodates 1 mm² cables with 2 to 36 conductors, depending on the part number. The table below allows comparison of the existing code, usable length and standard or vertical mounting.
Send the full code and quantity, with a nameplate photograph if available. Specify the usable length, cable, exit direction and mounting dimensions to be retained.
Right-hand model CRD or left-hand model CRS. CANBus, Ethernet and Profinet subject to approval. Vertical downward travel: check the code in the dedicated column.
Two catalogue inconsistencies require confirmation before ordering: the 6x1 mm² entry stated as 20 m bears code CRD370.061018; the 7x1 mm² entry in 6 m pairs CRD230.071006 with CRD270.071006/VD. Values and codes are transcribed without arbitrary corrections.
The series code does not guarantee interchangeability. Check the full part number, direction, travel, operating current and mounting drawing. For a data bus, specify the protocol to be transmitted.
Other series to compare:
All entries in the series are reproduced below, with dimensions A to E and standard/vertical codes. A dash means that the value or part number is not specified in the catalogue.
| Cable (mm²) | Cable Ø (mm) | Usable length (m) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Bracket | Standard code with cable | Vertical code with cable |
|---|---|---|---|---|---|---|---|---|---|---|
| 2x1 | 6 | 5 | 166 | 72 | 236 | 228 | 45 | S1 | CRD230.021005 | CRD230.021005/VD |
| 2x1 | 6 | 10 | 178 | 84 | 236 | 228 | 45 | S1 | CRD230.021010 | CRD230.021010/VD |
| 2x1 | 6 | 15 | 165 | 70 | 296 | 288 | 46 | S1 | CRD295.021015 | CRD295.021015/VD |
| 2x1 | 6 | 27 | 178 | 75 | 422 | 272 | 47 | S1 | CRD420.021027 | CRD420.021027/VD |
| 2x1 | 6 | 32 | 178 | – | 422 | 272 | 47 | S1 | CRD420.021032 | CRD420.021032/VD |
| 2x1 | 6 | 38 | 178 | – | 478 | 322 | 47 | S1 | CRD470.021038 | CRD470.021038/VD |
| 3x1 | 7,3 | 8 | 166 | 72 | 236 | 228 | 45 | S1 | CRD230.031008 | CRD230.031008/VD |
| 3x1 | 7,3 | 10 | 178 | 84 | 236 | 228 | 45 | S1 | CRD230.031010 | CRD230.031010/VD |
| 3x1 | 7,3 | 15 | 178 | 60 | 340 | 272 | 47 | S1 | CRD340.031015 | CRD340.031015/VD |
| 3x1 | 7,3 | 25 | 178 | 67 | 378 | 322 | 47 | S1 | CRD370.031025 | CRD370.031025/VD |
| 3x1 | 7,3 | 30 | 178 | 70 | 422 | 322 | 37 | S1 | CRD420.031030 | CRD420.031030/VD |
| 3x1 | 7,3 | 38 | 178 | – | 478 | 422 | 47 | S1 | CRD470.031038 | CRD470.031038/VD |
| 4x1 | 8 | 12 | 178 | 70 | 296 | 288 | 47 | S1 | CRD295.041012 | CRD295.041012/VD |
| 4x1 | 8 | 28 | 178 | 92 | 420 | 288 | 47 | S1 | CRD420.041028 | CRD420.041028/VD |
| 6x1 | 10 | 5 | 193 | 99 | 236 | 228 | 45 | S1 | CRD230.061005 | CRD230.061005/VD |
| 6x1 | 10 | 15 | 192 | 63 | 378 | 272 | 47 | S1 | CRD370.061015 | CRD370.061015/VD |
| 6x1 | 10 | 20 | 192 | 70 | 378 | 272 | 47 | S1 | CRD370.061018 | CRD370.061018/VD |
| 6x1 | 10 | 25 | 192 | 80 | 422 | 322 | 47 | S1 | CRD420.061025 | CRD420.061025/VD |
| 6x1 | 10 | 30 | 192 | – | 620 | 422 | 47 | S1 | CRD600.061030 | CRD600.061030/VD |
| 6x1 | 10 | 35 | 192 | – | 720 | 532 | 47 | S1 | CRD700.061035 | CRD700.061035/VD |
| 7x1 | 11 | 6 | 193 | 99 | 236 | 228 | 45 | S1 | CRD230.071006 | CRD270.071006/VD |
| 7x1 | 11 | 10 | 192 | 70 | 340 | 272 | 47 | S1 | CRD340.071010 | CRD340.071010/VD |
| 7x1 | 11 | 18 | 192 | 80 | 378 | 272 | 47 | S1 | CRD370.071018 | CRD370.071018/VD |
| 7x1 | 11 | 21 | 192 | 84 | 378 | 322 | 47 | S1 | CRD370.071021 | CRD370.071021/VD |
| 8x1 | 11 | 10 | 192 | 75 | 340 | 272 | 47 | S1 | CRD340.081010 | CRD340.081010/VD |
| 8x1 | 11 | 18 | 192 | 80 | 378 | 272 | 47 | S1 | CRD370.081018 | CRD370.081018/VD |
| 8x1 | 11 | 20 | 192 | 80 | 378 | 272 | 47 | S1 | CRD370.081020 | CRD370.081020/VD |
| 8x1 | 11 | 25 | 192 | 80 | 422 | 272 | 47 | S1 | CRD420.081025 | CRD420.081025/VD |
| 12x1 | 13 | 5 | 218 | 92 | 320 | 272 | 47 | S1 | CRD320.121005 | CRD320.121005/VD |
| 12x1 | 13 | 10 | 218 | 92 | 378 | 272 | 47 | S1 | CRD370.121010 | CRD370.121010/VD |
| 12x1 | 13 | 15 | 218 | 92 | 400 | 322 | 47 | S1 | CRD400.121015 | CRD400.121015/VD |
| 12x1 | 13 | 18 | 218 | 92 | 400 | 322 | 47 | S1 | CRD400.121018 | CRD400.121018/VD |
| 12x1 | 13 | 20 | 218 | 106 | 400 | 322 | 47 | S1 | CRD400.121020 | CRD400.121020/VD |
| 12x1 | 13 | 25 | 221 | 80 | 570 | 422 | 47 | S1 | CRD570.121025 | CRD570.121025/VD |
| 12x1 | 13 | 32 | 221 | 92 | 620 | 532 | 47 | S1 | CRD620.121032 | CRD620.121032/VD |
| 16x1 | 15 | 10 | 248 | 92 | 378 | 322 | 47 | S1 | CRD370.161010 | CRD370.161010/VD |
| 16x1 | 15 | 15 | 248 | 92 | 478 | 322 | 47 | S1 | CRD470.161015 | CRD470.161015/VD |
| 16x1 | 15 | 22 | 248 | 100 | 500 | 422 | 47 | S1 | CRD500.161022 | CRD500.161022/VD |
| 16x1 | 15 | 30 | 248 | 92 | 720 | 532 | 47 | S1 | CRD700.161030 | CRD700.161030/VD |
| 16x1 | 15 | 40 | – | – | 720 | – | – | – | CRD700.161040 | CRD700.161040/VD |
| 18x1 | 16 | 14 | 275 | 92 | 520 | 322 | 47 | S1 | CRD520.181014 | CRD520.181014/VD |
| 20x1 | 15 | 10 | 275 | 92 | 378 | 322 | 47 | S1 | CRD370.201010 | CRD370.201010/VD |
| 20x1 | 15 | 20 | 275 | 92 | 570 | 422 | 47 | S1 | CRD570.201020 | CRD570.201020/VD |
| 25x1 | 15,5 | 5 | 298 | 106 | 340 | 272 | 47 | S1 | CRD340.251005 | CRD340.251005/VD |
| 25x1 | 15,5 | 10 | 298 | 92 | 400 | 322 | 47 | S1 | CRD400.251010 | CRD400.251010/VD |
| 25x1 | 15,5 | 15 | 298 | 80 | 520 | 322 | 47 | S1 | CRD520.251015 | CRD520.251015/VD |
| 25x1 | 15,5 | 20 | 298 | 92 | 570 | 422 | 47 | S1 | CRD570.251020 | CRD570.251020/VD |
| 25x1 | 15,5 | 27 | 298 | 106 | 620 | 422 | 47 | S1 | CRD600.251027 | CRD600.251027/VD |
| 30x1 | 17 | 15 | 310 | 92 | 520 | 422 | 47 | S2 | CRD520.301015 | CRD520.301015/VD |
| 32x1 | 19 | 5 | 310 | 80 | 478 | 322 | 47 | S2 | CRD470.321005 | CRD470.321005/VD |
| 32x1 | 19 | 12 | 310 | 92 | 520 | 322 | 47 | S2 | CRD520.321012 | CRD520.321012/VD |
| 32x1 | 19 | 20 | 310 | 106 | 620 | 422 | 47 | S2 | CRD600.321020 | CRD600.321020/VD |
| 32x1 | 19 | 25 | 310 | 106 | 650 | 422 | 47 | S2 | CRD650.321025 | CRD650.321025/VD |
| 36x1 | 19 | 15 | 330 | 106 | 570 | 422 | 47 | S2 | CRD570.361015 | CRD570.361015/VD |
| 36x1 | 19 | 25 | 330 | 106 | 650 | 422 | 47 | S2 | CRD650.361025 | CRD650.361025/VD |
Tell us the voltage, current, number of conductors and cross-section, payout length and working environment.