DEMAC range · Quotations and technical advice on request
DEMAC forklift kits with 4 hydraulic lines: K9–K12 with R7/B1, K13–K16 with R8, and metric, JIC, BSP or DIN fittings. Part number, orientation and configuration to be identified.
| Product type | Hose reel |
|---|---|
| Hose configuration | Twin hose |
| Number of lines | 4 hydraulic lines |
| Application | Forklift truck, High-pressure hydraulics, Oil |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 160 bar, 190 bar, 210 bar, 245 bar, 300 bar |
| Hose diameter | 1/4" - DN 6, 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13 |
| Hose type | B1, SAE 100 R7, SAE 100 R8 |
| Fitting type | BSP 60°, DIN 24°, JIC 74°, Metric 60° |
| ATEX zone | No |
| Equipment | Bare reel, Supplied with hoses, articulated guide and fittings |
| Technical drawings | View the hose length calculation diagram Hose length calculation diagram, not a dimensional drawing of the kit. |
Forklift kits K9 to K16 combine a reel with four hydraulic lines, the hoses, the articulated Crocodile guide and the fittings for the selected configuration. Identify the kit by its full part number and right-hand or left-hand orientation; do not confuse it with the bare H2 reel.
Provide the nameplate information and photos of the installation, the lift height and mast type, diameters, working pressure and flow rate, fittings and available installation space.
| Fittings | R7 / B1 kits | R8 kits |
|---|---|---|
| Metric | K9 | K13 |
| JIC | K10 | K14 |
| BSP | K11 | K15 |
| DIN | K12 | K16 |
| Hose | Internal Ø | Hose working pressure |
|---|---|---|
| R7 — K9 to K12 | 1/4" | 210 bar |
| R7 — K9 to K12 | 5/16" | 190 bar |
| R7 — K9 to K12 | 3/8" | 160 bar |
| B1 — K9 to K12 | 1/2" | 190 bar |
| R8 — K13 to K16 | 1/4" | 350 bar |
| R8 — K13 to K16 | 5/16" | 300 bar |
| R8 — K13 to K16 | 3/8" | 280 bar |
| R8 — K13 to K16 | 1/2" | 245 bar |
These pressures apply to the hoses. The H2 data sheet separately states 300 bar and 30 l/min for the reel; a hose rating of 350 bar does not qualify the complete assembly for 350 bar. The pressure rating of the complete configuration must be confirmed.
The following table covers H2 only: usable lengths in mm and weights by part number. The 1/2" part numbers with suffix .12 are listed separately. Look up the lengths of a complete kit on its own K9 to K16 data sheet.
| Part no. right-hand / left-hand | Flange Ø mm | 1/4" | 5/16" | 3/8" | 1/2" | Weight kg |
|---|---|---|---|---|---|---|
| 22828 / 22829 | 270 | 3 700 | — | — | — | — |
| 21650 / 21651 | 295 | 2 700 | 2 000 | 2 000 | — | 16,5 |
| 21652 / 21653 | 320 | 3 700 | 2 900 | 3 000 | — | 17 |
| 21654 / 21655 | 340 | 4 700 | 3 900 | 3 700 | — | 17,5 |
| 21656 / 21657 | 370 | 5 700 | 5 000 | 4 200 | — | 18 |
| 21656.12 / 21657.12 | 370 | — | — | — | 3 200 | 19 |
| 21658 / 21659 | 400 | 7 000 | 6 200 | 5 300 | — | 18,5 |
| 21658.12 / 21659.12 | 400 | — | — | — | 4 200 | 20 |
| 21660 / 21661 | 420 | — | 7 500 | 6 200 | — | 22,5 |
| 21660.12 / 21661.12 | 420 | — | — | — | 5 200 | 24 |
To prepare the enquiry, see the forklift kit range and the information on reel installation (FR).
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.