DEMAC range · Quotations and technical advice on request
A4 Compact reel: four hydraulic lines in two 1/4″ twin hoses, 25 l/min. Five sizes and 1,9 to 5,7 m usable length; right-hand or left-hand models.
| Product type | Hose reel |
|---|---|
| Hose configuration | Twin hose |
| Number of lines | 4 hydraulic lines |
| Flow rate | 25 l/min |
| Application | Forklift truck, High-pressure hydraulics, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 300 bar, 400 bar |
| Length range | Up to 15 m |
| ATEX zone | On request |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, Supplied with hoses |
| Hose diameter | 1/4" – DN 6 |
| Hose type | B1, SAE 100 R7, SAE 100 R8 |
| Technical drawings | View technical drawings |
The A4 Compact provides four hydraulic lines in two 1/4″ twin hoses, with spring return. Its five sizes offer 1,9 to 5,7 m of usable length, with a maximum flow rate of 25 l/min. The diameter, travel and mounting must be compared with the existing part number.
A4D: right-hand model; A4S: left-hand model. A4D230.06.XX denotes size 230 and diameter 1/4″. XX specifies R7, R8 or B1 after confirmation.
/VD.Dimensions in millimetres, weights without hoses. Sizes 230 and 270 here have reel side plates of 230 and 270 mm: do not apply the dimensions of the AG Compact to them. The drawing shows 4 × 3/8″ and a mounting flange with Ø 11 mm holes, a 60 mm square centre spacing and an 80 mm overall envelope.
| Model | A | B | D (reel side plate) | E | F | Weight without hoses |
|---|---|---|---|---|---|---|
| A4D230 | 210 | 90 | 230 | 30 | 226 | 11 kg |
| A4D270 | 210 | 90 | 270 | 30 | 272 | 14 kg |
| A4D295 | 210 | 90 | 295 | 37 | 291 | 17 kg |
| A4D320 | 210 | 90 | 325 | 37 | 272 | 17 kg |
| A4D340 | 210 | 90 | 340 | 37 | 272 | 18 kg |
Lengths in metres. The data sheet lists only 1/4″ in R7, R8 or B1. The usable length, from 1,9 to 5,7 m, is distinct from the total fitted length.
| Part number | Internal Ø | Total length | Usable length |
|---|---|---|---|
| A4D230.06.XX | 1/4″ | 2,2 | 1,9 |
| A4D270.06.XX | 1/4″ | 4,0 | 3,7 |
| A4D295.06.XX | 1/4″ | 4,7 | 4,4 |
| A4D320.06.XX | 1/4″ | 5,5 | 5,2 |
| A4D340.06.XX | 1/4″ | 6,0 | 5,7 |
Example of a hose-equipped part number to be confirmed: A4D295.06.B1. For a bare reel, specify “without hoses”. The generic suffix XX does not confirm supply without hoses.
The permissible pressure of the supplied assembly must remain within the limits of the reel, hose and connections. Specify the fluid, its temperature, the flow rate and the working pressure to confirm the hose-equipped part number; the pressure rating of the reel alone does not guarantee that of every hose combination.
Reference values from the TU2 catalogue: pressure ratings of the hose alone, in bar. These values are not the guaranteed pressure rating of the hose-equipped reel. The final configuration must remain within the limits of all its components; the table below does not establish that every combination is available for every size.
| Internal Ø | Hose type | Pressure rating of hose alone (bar) |
|---|---|---|
| 1/4″ | R7 | 210 |
| 1/4″ | B1 | 310 |
| 1/4″ | R8 | 350 |
To replace a reel, send the full part number and a photo of the nameplate, together with details of the mounting, right-hand/left-hand configuration, working position, fittings and usable length. Request the manual for the exact version before installation or any work on the reel.
For greater travel or a larger diameter, compare the A4 Standard, rated at 30 l/min in its detailed data sheets. For four separate hoses, compare the S4; do not infer interchangeability from the number of hydraulic lines alone. See the DEMAC technical catalogues.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.