DEMAC range · Quotations and technical advice on request
LS/300 reel: two hydraulic lines in a twin hose with locking and spring return. B1 hose, diameters 1/4″ to 1/2″; catalogue lengths 5.6 to 28 m.
| Product type | Hose reel |
|---|---|
| Hose configuration | Twin hose |
| Number of lines | 2 hydraulic lines |
| Flow rate | 40 l/min |
| Application | Grease, High-pressure hydraulics, Oil |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 300 bar |
| Hose diameter | 1/4" - DN 6, 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13 |
| Length range | Up to 15 m, 15 to 30 m |
| ATEX zone | On request |
| Hose type | B1 |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, Supplied with hoses |
| Technical drawings | View technical drawings |
The LS/300 is a reel with two hydraulic lines in a twin hose, with hose locking and spring return. The seven sizes are shown with B1 hose from 1/4″ to 1/2″ depending on the part number. Keep suffix LS/300 to identify the version.
AGD: right-hand; AGS: left-hand. The full part number includes the diameter code and LS/300. Attach a photograph of the nameplate, fittings and existing mounting.
Dimensions A/B/C/D/E/G in millimetres and weights without hose. Weights for 600/700/800 vary with diameter; 1/2″ corresponds to 33/44/55 kg. Check the full mounting dimensions.
| Model | A | B | C | D (side plate) | E | G | Weight without hoses |
|---|---|---|---|---|---|---|---|
| AGD400 LS/300 | 670 | 200 | 160 | 400 | 200 | 160 | 24 kg |
| AGD470 LS/300 | 670 | 200 | 160 | 470 | 200 | 160 | 26 kg |
| AGD520 LS/300 | 670 | 200 | 160 | 520 | 200 | 160 | 27 kg |
| AGD600 LS/300 | 670 | 200 | 160 | 620 | 200 | 160 | 32 to 33 kg |
| AGD700 LS/300 | 780 | 290 | 260 | 720 | 237 | 192 | 39 to 44 kg |
| AGD800 LS/300 | 890 | 290 | 260 | 820 | 237 | 192 | 49 to 55 kg |
| AGD900 LS/300 | 990 | 290 | 260 | 920 | 237 | 192 | 65 kg |
The catalogue has a column headed “m” without specifying total or usable length: the values below are therefore catalogue lengths, not a guaranteed usable travel. All entries in this section are shown with B1.
| Part number | Internal Ø | Length |
|---|---|---|
| AGD400.06 LS/300 | 1/4″ | 7.3 |
| AGD400.08 LS/300 | 5/16″ | 6.5 |
| AGD400.10 LS/300 | 3/8″ | 5.6 |
| AGD470.06 LS/300 | 1/4″ | 11.5 |
| AGD470.08 LS/300 | 5/16″ | 10.5 |
| AGD470.10 LS/300 | 3/8″ | 10.0 |
| AGD520.06 LS/300 | 1/4″ | 14.5 |
| AGD520.08 LS/300 | 5/16″ | 13.5 |
| AGD520.10 LS/300 | 3/8″ | 12.5 |
| AGD600.06 LS/300 | 1/4″ | 21.0 |
| AGD600.08 LS/300 | 5/16″ | 17.0 |
| AGD600.10 LS/300 | 3/8″ | 16.0 |
| AGD600.12 LS/300 | 1/2″ | 12.0 |
| AGD700.06 LS/300 | 1/4″ | 23.0 |
| AGD700.08 LS/300 | 5/16″ | 21.0 |
| AGD700.10 LS/300 | 3/8″ | 21.0 |
| AGD700.12 LS/300 | 1/2″ | 15.0 |
| AGD800.06 LS/300 | 1/4″ | 28.0 |
| AGD800.08 LS/300 | 5/16″ | 26.0 |
| AGD800.10 LS/300 | 3/8″ | 25.0 |
| AGD800.12 LS/300 | 1/2″ | 21.0 |
| AGD900.12 LS/300 | 1/2″ | 28.0 |
Catalogue lengths range from 5.6 to 28 m. The 1/2″ version is listed only from size 600 onwards. Have the usable travel and permissible pressure of the equipped assembly specified for your application.
The AG/LS manual describes a locking pawl and spring return: guide the hose as it retracts, without allowing it to rewind freely. Before installation or servicing, request the manual for the exact version; its mounting and prewinding requirements cannot be inferred from another part number.
The permissible pressure of the supplied assembly must respect the limits of the reel, hose and connections. Specify the fluid, its temperature, the flow rate and working pressure to validate the equipped part number; the pressure rating of the reel alone does not guarantee that of every hose combination.
TU2 catalogue reference data: pressure ratings of the hose alone, in bar. These values are not the guaranteed pressure rating of the equipped reel. The final configuration must respect the limits of all its components; the table below does not establish that every combination is available in every size.
| Internal Ø | Hose type | Pressure rating of hose alone (bar) |
|---|---|---|
| 1/4″ | B1 | 310 |
| 5/16″ | B1 | 250 |
| 3/8″ | B1 | 225 |
| 1/2″ | B1 | 190 |
To replace a reel, send the full part number and a photograph of the nameplate, mounting details, right/left-hand version, working position, fittings and usable length. Request the manual for the exact version before installation or servicing.
For a 700 bar version, compare the LS/700 page and its dedicated hoses; the pressure rating of the reel alone does not validate a fitted hose. See the DEMAC technical catalogues.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.