DEMAC range · Quotations and technical advice on request
DEMAC CR 025: 0,25 mm² cable, maximum 50 V and 1 A. Part numbers, lengths and dimensions to identify your reel or prepare a replacement.
| Product type | Electrical cable reel |
|---|---|
| Application | Electrical cable |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Voltage | 50 V |
| Current | 1 A |
| Number of conductors | 2x, 3x, 4x |
| Length range | Up to 15 m |
| ATEX zone | No |
| Maximum fluid temperature | 60 °C |
| Equipment | With cable, Without cable |
| Cross-section | 0.25 mm² |
| Technical drawings | View technical drawings |
The DEMAC CR 025 series accommodates 2, 3 or 4 conductors of 0,25 mm². The three catalogue part numbers cover 2 or 3,3 m, with a maximum voltage of 50 V and maximum current of 1 A.
Send the full code and quantity, with a nameplate photograph if available. Specify the usable length, cable, exit direction and mounting dimensions to be retained.
Right-hand model CRD or left-hand model CRS. CANBus, Ethernet and Profinet subject to approval. Technical drawings on request.
CRD120 denotes the right-hand model and CRS120 the left-hand model. The drawing shows a 75 mm core, 7 mm holes and a mounting centre distance of 60 mm; 80 mm is the overall lug width, not a second centre distance.
The series code does not guarantee interchangeability. Check the full part number, direction, travel, operating current and mounting drawing. For a data bus, specify the protocol to be transmitted.
Other series to compare:
The three catalogue configurations are reproduced below.
| Right-hand part number | Cable (mm²) | Cable Ø (mm) | Length (m) | A (mm) | B (mm) | D (mm) |
|---|---|---|---|---|---|---|
| CRD120.0202533 | 2x0,25 | 3,8 | 3,3 | 88 | 35 | 120 |
| CRD120.0302533 | 3x0,25 | 3,8 | 3,3 | 110 | 57 | 120 |
| CRD120.0402502 | 4x0,25 | 4 | 2 | 131 | 84 | 120 |
Tell us the voltage, current, number of conductors and cross-section, payout length and working environment.