DEMAC range · Quotations and technical advice on request
DEMAC 800–804 automatic hose reels with hose locking and swivel bracket. Hoses from 5 to 20 m, 10 or 15 bar depending on part number, dimensions in millimetres.
| Product type | Hose reel |
|---|---|
| Hose configuration | Single hose |
| Number of lines | 1 line |
| Flow rate | 40 l/min |
| Application | Compressed air |
| Rewind mechanism | Automatic with locking device |
| Type de fixation | Swivel wall mounting |
| Pressure | 10 bar, 15 bar |
| Length | 10 m, 15 m, 20 m, 5 m |
| Length range | Up to 15 m, 15 to 30 m |
| ATEX zone | No |
| Maximum fluid temperature | 60 °C |
| Equipment | Supplied with hose |
| Hose diameter | 10 mm, 12 mm, 6 mm, 8 mm |
| Technical drawings | View technical drawings |
Automatic hose reels 800 to 804 are fitted with a hose locking device and swivel bracket. Select the part number according to the hose dimensions in millimetres, length and pressure stated in the table.
Send the part number or a nameplate photograph, the fluid, working pressure and temperature, actual hose internal diameter, length and mounting dimensions.
The catalogue sheet title mentions air and water; the five table entries are grouped under “compressed air”. For water, have the relevant configuration confirmed. Hoses are specified by internal × external diameter in mm, without automatic conversion to inches.
| Model | Hose mm | Length | Pressure | A mm | B mm | C mm | D mm | Ø E mm |
|---|---|---|---|---|---|---|---|---|
| 800 | 6x8 | 5 m | 10 bar | 225 | 130 | 180 | 100 | 6,5 |
| 801 | 6x10 | 10 m | 10 bar | 310 | 160 | 260 | 70 | 8,5 |
| 802 | 8x12 | 15 m | 15 bar | 450 | 195 | 361 | 70 | 8,5 |
| 803 | 10x15 | 20 m | 15 bar | 530 | 210 | 425 | 70 | 10,5 |
| 804 | 12x18 | 15 m | 15 bar | 530 | 210 | 425 | 70 | 10,5 |
The data sheet states a maximum flow rate of 40 l/min, a maximum hose speed of 30 m/min and a temperature range of −10 to +60 °C. Dimensions A to E refer to the configuration drawing; the drawing and manual remain necessary for installation.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.