DEMAC range · Quotations and technical advice on request
DEMAC 19000 hose reels in painted steel, with 1/2 or 1 inch BSPP rotary unions. Pressure, temperature and length depend on the part number; model table up to 60 m.
| Product type | Hose reel |
|---|---|
| Hose configuration | Single hose |
| Number of lines | 1 line |
| Flow rate | 40 l/min, 135 l/min |
| Application | Compressed air, Fuel / hydrocarbons, Grease, Nitrogen, Oil |
| Rewind mechanism | Manual with locking device |
| Material | Painted steel |
| Type de fixation | Fixed wall mounting, Swivel wall mounting |
| Pressure | 100 bar, 200 bar, 600 bar |
| Hose diameter | 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13, 3/4" - DN 19, 1" - DN 25 |
| Length | 15 m, 18 m, 20 m, 25 m, 30 m, 60 m, 35 m |
| Length range | 15 to 30 m, 30 to 50 m, 50 to 100 m |
| ATEX zone | No |
| Hose type | 1SN, 2SC, I21 |
| Fitting type | BSPP |
| Maximum fluid temperature | 60 °C, 100 °C |
| Equipment | Bare reel, Supplied with hose and fittings |
| Technical drawings | View technical drawings |
Series 19000 is available in painted steel for air, oil, diesel and grease. The part numbers are divided between 1/2" BSPP and 1" BSPP rotary unions, with limits specific to each group.
Send the full part number, a nameplate photograph, the fluid, working pressure and temperature, hose diameter and length, fittings and the installation drawing.
The catalogue states 600 bar and a maximum fluid temperature of 60 °C for this group. Available hose types are 1SN, 2SC and I21, with zinc-plated fittings; selection must be confirmed for the working pressure and temperature.
| Model | Ø hose | Length | A | B | C | D | Bracket |
|---|---|---|---|---|---|---|---|
| 19090.08 / .10 / .12 | 5/16″, 3/8″, 1/2″ | 15,0 | 240 | 560 | 450 | 120 | 19767 |
| 19091.08 / .10 | 5/16″, 3/8″ | 20,0 | 240 | 560 | 450 | 120 | 19767 |
| 19091.12 | 1/2″ | 15,0 | 240 | 560 | 450 | 120 | 19767 |
| 19092.08 / .10 | 5/16″, 3/8″ | 25,0 | 270 | 560 | 450 | 150 | 19768 |
| 19092.12 | 1/2″ | 20,0 | 270 | 560 | 450 | 150 | 19768 |
| 19093.08 / .10 / .12 | 5/16″, 3/8″, 1/2″ | 25,0 | 303 | 560 | 450 | 200 | 19768 |
| 19074.08 / .10 / .12 | 5/16″, 3/8″, 1/2″ | 30,0 | 370 | 590 | 600 | 150 | 19777 |
| 19083.08 / .10 / .12 | 5/16″, 3/8″, 1/2″ | 35,0 | 370 | 590 | 600 | 150 | 19777 |
| 19086.08 / .10 / .12 | 5/16″, 3/8″, 1/2″ | 60,0 | 650 | 650 | 600 | 400 | — |
For the part numbers below, versions without .2 are rated at 100 bar and .2 versions at 200 bar. Stated maximum fluid temperature: 100 °C. Lengths follow the order of the diameters.
| Model | Pressure | Ø hose | Length | A | B | C | D | Bracket |
|---|---|---|---|---|---|---|---|---|
| 19084.19 / .25 | 100 bar | 3/4″ and 1″ | 20,0 and 15,0 | 270 | 600 | 590 | 150 | 19777 |
| 19084.2.19 / .2.25 | 200 bar | 3/4″ and 1″ | 20,0 and 15,0 | 270 | 600 | 590 | 150 | 19777 |
| 19098.19 / .25 | 100 bar | 3/4″ and 1″ | 25,0 and 18,0 | 370 | 640 | 600 | 200 | 19777 |
| 19098.2.19 / .2.25 | 200 bar | 3/4″ and 1″ | 25,0 and 18,0 | 370 | 640 | 600 | 200 | 19777 |
| 19070.19 / .25 | 100 bar | 3/4″ and 1″ | 30,0 and 20,0 | 450 | 540 | 600 | 300 | 19769 |
| 19070.2.19 / .2.25 | 200 bar | 3/4″ and 1″ | 30,0 and 20,0 | 450 | 540 | 600 | 300 | 19769 |
The part numbers in the last column are optional swivel brackets. The data sheet states maximum flow rates of 40 and 135 l/min and a maximum hose speed of 30 m/min; specify the required flow rate to identify the configuration.
The group’s pressure ratings do not apply indiscriminately to all hoses. The drawing and manual for the configuration are required for mounting and adjustments.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.