DEMAC range · Quotations and technical advice on request
DEMAC 9100 and 9150–9155 hose reels: painted steel or stainless steel, pressure and length according to part number. Up to 40 m or 1 1/4 inch, on different models.
| Product type | Hose reel |
|---|---|
| Hose configuration | Single hose |
| Number of lines | 1 line |
| Flow rate | 135 l/min |
| Application | Compressed air, Fuel / hydrocarbons, Water, Oil |
| Rewind mechanism | Manual with locking device |
| Material | Painted steel, Stainless steel |
| Type de fixation | Fixed wall mounting, Swivel wall mounting |
| Pressure | 20 bar, 100 bar, 200 bar, 600 bar |
| Hose diameter | 5/16" - DN 8, 3/8" - DN 10, 1/2" - DN 13, 3/4" - DN 19, 1" - DN 25, 1"1/4 - DN 32/33 |
| Length | 12 m, 15 m, 18 m, 20 m, 25 m, 30 m, 40 m, 8 m |
| Length range | Up to 15 m, 15 to 30 m, 30 to 50 m |
| ATEX zone | No |
| Maximum fluid temperature | 100 °C, 150 °C |
| Equipment | Bare reel, Supplied with hose |
| Technical drawings | View technical drawings |
Series 9100 includes painted steel versions and models 9150 to 9155 in stainless steel for water. Pressure, hose length and dimensions vary by part number: the maximum diameter of 1 1/4" and maximum length of 40 m do not apply to the same model.
Send the full part number including suffix, a nameplate photograph, the fluid, working pressure and temperature, hose, connection and installation dimensions.
The pressures below are those shown on the 9100 catalogue sheet. Lengths follow the order of the listed diameters. The manufacturer’s table does not specify the hose type: this must be stated in the enquiry.
| Model | Pressure | Ø hose | Length | A | B | C | D | E | F | Bracket |
|---|---|---|---|---|---|---|---|---|---|---|
| 9100-08 / -10 / -12 | 600 bar | 5/16″, 3/8″, 1/2″ | 25 | 250 | 265 | 300 | 265 | 295 | 310 | 9084 |
| 9101-08 / -10 / -12 | 600 bar | 5/16″, 3/8″, 1/2″ | 40 | 300 | 415 | 350 | 205 | 235 | 435 | 9079 |
| 9102-19 / -25 | 100 bar | 3/4″ and 1″ | 12 and 8 | 150 | 265 | 205 | 205 | 235 | 305 | 9076 |
| 9103-19 / -25 | 100 bar | 3/4″ and 1″ | 18 and 15 | 300 | 415 | 350 | 205 | 235 | 435 | 9079 |
| 9105-19 / -25 | 100 bar | 3/4″ and 1″ | 30 and 25 | 400 | 470 | 450 | 255 | 285 | 500 | — |
| 9107-32 | 20 bar | 1″1/4 | 20 | 400 | — | 600 | — | 650 | — | — |
Stated maximum fluid temperature: 150 °C for 9150/9151, 100 °C for 9152/9153/9155. The table specifies zinc-plated fittings; stainless steel fittings must not be inferred solely from the reel material.
| Model | Pressure | Ø hose | Length | A | B | C | D | E | F | Bracket |
|---|---|---|---|---|---|---|---|---|---|---|
| 9150-08 / -10 / -12 | 200 bar | 5/16″, 3/8″, 1/2″ | 25 | 250 | 265 | 300 | 265 | 295 | 310 | 9085 |
| 9151-08 / -10 / -12 | 200 bar | 5/16″, 3/8″, 1/2″ | 40 | 300 | 415 | 350 | 205 | 235 | 435 | 9080 |
| 9152-19 / -25 | 100 bar | 3/4″ and 1″ | 12 and 8 | 150 | 265 | 205 | 205 | 235 | 305 | 9078 |
| 9153-19 / -25 | 100 bar | 3/4″ and 1″ | 18 and 15 | 300 | 415 | 350 | 205 | 235 | 435 | 9080 |
| 9155-19 / -25 | 100 bar | 3/4″ and 1″ | 30 and 25 | 400 | 470 | 450 | 255 | 285 | 500 | — |
Swivel brackets are optional and identified in the corresponding column. The catalogue states a maximum flow rate of 135 l/min and a maximum hose speed of 30 m/min. The limits of the hose and fittings in the assembly must be confirmed for the required operating conditions.
The drawing and manual for the relevant part number are required for installation and adjustments. Values or instructions for another series do not replace these documents.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.