DEMAC range · Quotations and technical advice on request
A2.25 reel: two separate hoses, 135 l/min, diameters 1/2″ to 1″. From 3 to 37 m usable length depending on configuration; larger models on request.
| Product type | Hose reel |
|---|---|
| Hose configuration | Separate hoses |
| Number of lines | 2 hydraulic lines |
| Flow rate | 135 l/min |
| Application | High-pressure hydraulics, Mobile machinery and cranes |
| Rewind mechanism | Automatic (spring rewind) |
| Material | Painted steel |
| Pressure | 300 bar, 400 bar |
| Hose diameter | 1/2" - DN 13, 5/8" - DN 16, 3/4" - DN 19, 1" - DN 25 |
| Length range | Up to 15 m, 15 to 30 m, 30 to 50 m |
| ATEX zone | On request |
| Hose type | 2SC, 4SH, 4SP |
| Maximum fluid temperature | 80 °C |
| Equipment | Bare reel, Supplied with hoses |
| Technical drawings | View technical drawings |
The A2.25 is a spring-driven reel for two separate hoses, up to 135 l/min. The configurations with listed specifications cover flange diameters from 620 to 1 200 mm and usable lengths from 3 to 37 m depending on the hose diameter and type. Additional larger models are available only on request.
A2D denotes the right-hand model and A2S the left-hand model. Retain the series .25, diameter code and hose type; 4SH applies to the 1″ rows in the table.
/VD.Dimensions specified in the catalogue, in millimetres. Weights are not stated. The drawing shows a 2 × 1″ connection; request the complete drawing to confirm the mountings and overall dimensions.
| Right-hand model | A (mm) | B (mm) | D: flange (mm) | F (mm) |
|---|---|---|---|---|
| A2D600.25 | 545 | 305 | 620 | 605 |
| A2D700.25 | 545 | 305 | 720 | 605 |
| A2D800.25 | 545 | 305 | 810 | 605 |
| A2D900.25 | 545 | 305 | 910 | 605 |
| A2D1000.25 | 545 | 305 | 1000 | 605 |
| A2D1200.25 | 545 | 305 | 1200 | 605 |
Total and usable lengths in metres. The 4SP and 4SH columns are separate so as not to suggest that both types are offered in every diameter. A missing length is indicated by a dash.
| Part number | Ø | 2SC: total (m) | 2SC: usable (m) | 4SP: total (m) | 4SP: usable (m) | 4SH: total (m) | 4SH: usable (m) |
|---|---|---|---|---|---|---|---|
| A2D600.25.19.XX | 3/4″ | 4,0 | 3,0 | 4,0 | 3,0 | — | — |
| A2D600.25.25.XX | 1″ | 4,0 | 3,0 | — | — | 4,0 | 3,0 |
| A2D700.25.16.XX | 5/8″ | 9,5 | 8,5 | 9,5 | 8,5 | — | — |
| A2D700.25.19.XX | 3/4″ | 8,0 | 7,0 | 8,0 | 7,0 | — | — |
| A2D700.25.25.XX | 1″ | 6,4 | 5,4 | — | — | 6,4 | 5,4 |
| A2D800.25.12.XX | 1/2″ | 16,0 | 15,0 | 16,0 | 15,0 | — | — |
| A2D800.25.16.XX | 5/8″ | 14,0 | 13,0 | 14,0 | 13,0 | — | — |
| A2D800.25.19.XX | 3/4″ | 12,0 | 11,0 | 10,0 | 9,0 | — | — |
| A2D800.25.25.XX | 1″ | 10,0 | 9,0 | — | — | 8,6 | 7,6 |
| A2D900.25.12.XX | 1/2″ | 21,0 | 20,0 | 21,0 | 20,0 | — | — |
| A2D900.25.16.XX | 5/8″ | 19,0 | 18,0 | 17,0 | 16,0 | — | — |
| A2D900.25.19.XX | 3/4″ | 15,0 | 14,0 | 15,0 | 14,0 | — | — |
| A2D900.25.25.XX | 1″ | 13,5 | 12,5 | — | — | 11,2 | 10,2 |
| A2D1000.25.12.XX | 1/2″ | 25,0 | 24,0 | 25,0 | 24,0 | — | — |
| A2D1000.25.16.XX | 5/8″ | 23,0 | 22,0 | 23,0 | 22,0 | — | — |
| A2D1000.25.19.XX | 3/4″ | 20,0 | 19,0 | 19,0 | 18,0 | — | — |
| A2D1000.25.25.XX | 1″ | 15,0 | 14,0 | — | — | 15,0 | 14,0 |
| A2D1200.25.12.XX | 1/2″ | 38,0 | 37,0 | 38,0 | 37,0 | — | — |
| A2D1200.25.16.XX | 5/8″ | 30,0 | 29,0 | 30,0 | 29,0 | — | — |
| A2D1200.25.19.XX | 3/4″ | 30,0 | 29,0 | 26,0 | 25,0 | — | — |
| A2D1200.25.25.XX | 1″ | 22,0 | 21,0 | — | — | 22,0 | 21,0 |
Only on request: A2D1300.25.19.XX, the A2D1400.25.12/16/19/25.XX and the A2D1600.25.12/16/19/25.XX. This product page lists neither their lengths nor their dimensions: an approved drawing and configuration are required.
Example: the A2D900.25.16 in 5/8″ offers 18 m of usable length with 2SC, compared with 16 m with 4SP. The 37 m usable length applies to the A2D1200.25.12.XX in 1/2″. For a bare reel, specify “without hoses” in the quote request.
The permissible pressure of the supplied assembly must remain within the limits of the reel, hose and connections. Specify the medium, its temperature, flow rate and working pressure to confirm the equipped part number; the pressure rating of the reel alone does not guarantee the rating of every hose combination.
Figures from the TU1 catalogue: pressure ratings of the hose alone, in bar. These values are not the guaranteed pressure rating of the equipped reel. The final configuration must comply with the limits of all its components; the table below does not establish that every combination is available in every size.
| Internal Ø | Hose type | Pressure rating of the hose alone (bar) |
|---|---|---|
| 1″ | 2SC | 210 |
| 1″ | 4SH | 380 |
| 1/2″ | 2SC | 275 |
| 1/2″ | 4SP | 415 |
| 5/8″ | 2SC | 250 |
| 5/8″ | 4SP | 360 |
| 3/4″ | 2SC | 215 |
| 3/4″ | 4SP | 350 |
To replace a reel, provide the full part number and a photo of the nameplate, the mounting, right-hand/left-hand orientation, operating position, connections and usable length. Request the manual for the exact version before installation or any intervention.
Compare the AG.25 for a twin-hose configuration. The usable travel and available space must be checked against the hose type to be supplied. See the DEMAC technical catalogues.
Tell us the number of lines, hose diameter, working pressure and flow rate, usable length and the machine to be equipped.